3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? power clamp plug 3 mm, idc, wiremount, panel mount option 358 series ? easy, labor saving, and reliable idc termination ? easy feld termination with no special tooling or wire preparation C no stripping or tinning ? semi-transparent color-coded covers for wire inspection and wire retention ? cc-link communication interconnect standard ? one-touch latching mechanism maintains a reliable interconnection in demanding feld applications and requires only one hand to easily mate and unmate ? integrated dust cover also provides secure locking mechanism when mated to wiremount socket ? polarization ensures proper interconnecting of mated pairs ? quick insertion panel mount option ? rohs compliant. see paragraphs e1 and c1 of regulatory information appendix date modifed: mach 11, 2009 ts-2285-a sheet 1 of 3 physical insulation: body material: nylon cover material: polycarbonate flammability: ul 94v-0 body color: black cover color: clear, yellow, blue, red contact: material: copper alloy plating: underplating: 2.5 m ni minimum wiping area: 0.5 m au minimum idc termination area: 2.5 m au minimum wire accomodation: 18 awg solid and 7 strand, foamed pe or pvc insulation 20 awg solid and 7 strand, foamed pe or pvc insulation, cc-link ver1.10 cables contact 3m for additional wire accommodations mating compatability: 355, 35t series, 35715-l010 (with same polarization) electrical current rating: 10 a maximum (1 contact) 7 a maximum (2 or more contacts) voltage rating: 250 v insulation resistance: 10 3 m min. at 600 v dc withstanding voltage: 1,000 v rms for 1 minute environmental temperature rating: -20c to +70c ambient
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? power clamp plug 3 mm, idc, wiremount, panel mount option 358 series ts-2285-a sheet 2 of 3 ordering information 35805 - 6xx0 - xxx - gf mm [inch] tolerance unless noted 0 .0 .00 mm 1 ..3 .13 [ ] dimensions for reference only (ria e1 and c1 apply) available part numbers 3m part number outside diameter range of wire wire guage cover color panel mount 35805-6080-a00 gf 2.2 - 3.0 mm 18 awg clear no 35805-6080-ap0 gf 2.2 - 3.0 mm 18 awg clear yes 35805-6180-a00 gf 2.0 - 2.3 mm 18 awg blue no 35805-6180-ap0 gf 2.0 - 2.3 mm 18 awg blue yes 35805-6200-a00 gf 1.6 - 2.0 mm 20 awg yellow no 35805-6200-ap0 gf 1.6 - 2.0 mm 20 awg yellow yes 35805-6000-b0m gf* 2.2 - 3.0 mm 20 awg red no 35805-6000-bpm gf* 2.2 - 3.0 mm 20 awg red yes * 35805-6000-bxm gf connects communication cable with 3 discrete and 1 drain wire. twist drain wire 7 or more times to tighten strands and insert into wire position #5. 19.0 25.4 7.4 8.4 9.9 17.0 31.0 7.4 7.0 7.0 10.2 35.0 5.2 7.4 23.2 panel mount type wire outside diameter: 0: 2.2 C 3.0 mm 1: 2.0 C 2.3 mm 2: 1.6 C 2.0 mm polarizing key: a: type a (wide) b: type b (narrow) mounting type: 0: standard p: panel mount option: 0: 3m original m: drain wire wire size: 0: 20 awg 8: 18 awg
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? power clamp plug 3 mm, idc, wiremount, panel mount option 358 series ts-2285-a sheet 3 of 3
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed . unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec, as amended by eu commission decision 2005/717/ec, as amended by eu court of justice decision 2008/c 116/04 this product contains decabde in the insulating material in excess of the maximum concentration allowed for fnished products subject to eu rohs that are placed on the eu market after june 30, 2008. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. ria-2217b-e
appendix e5: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical and electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under item 6 of the annex to the directive. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. ria-2217b-e
important notice all statements, technical information, and recommendations related to 3ms products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. before using this product, you must evaluate it and determine if it is suitable for your intended application. you assume all risks and liability associated with such use. any statements related to the product which are not contained in 3ms current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized offcer of 3m. warranty; limited remedy; limited liability. this product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3m makes no other warranties including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. if this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3ms option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by law, 3m will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theory asserted. please recycle. printed in usa. ? 3m 2008. all rights reserved. ria-2217b-e 3 3m electronics solutions division 6801 river place blvd. austin, tx 78726-9000 u.s.a. 1-800-225-5373 www.3m.com/interconnects 3m is a trademark of 3m company. appendix c3: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers (excluding decabde); or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below.
|
